تعزيز "مبادرة الحزام والطريق"، وتخفيف الضغوط التنظيمية على الحكومة، وتوفير تكاليف تشغيل الشركات وتسهيل التجارة الدولية.
AC output is suitable for emergency lighting, projectors, cameras, laptops, TVs, drones , fans and more.
DC output is suitable for cell phones, tablet PCs, car refrigerators, LED lights, and so on.
Specification | |
Battery Power | 280Ah/314Ah Ternary Lithium Battery |
Solar DC Charging | 11-60V/ 180W Max |
AC Output | Pure Sine Wave Output |
DC5521*4 Output | 12V/7A |
USB1,2 output | QC3.0 output 5V3A; 9V2.5A; 12V2A 24W Max |
USB3,4 output | QC3.0 output 5V3A; 9V2.5A; 12V2A 24W Max |
TYPE-C1 output | 5V-3A 9V-3A 12V-3A 15V-2A 20V-3A 60W-Max |
TYPE-C2 output | 5V-3A 9V-3A 12V-2.5A 30W-Max |
LED light | Maximum power 3W; Full light/ |
Operation | -10℃~40℃ |
Work Humidity | 20%~85%RH |
Storage Temperature | -20℃~60℃ |
Storage Humidity | 20%~85%RH |
Life cycle | ≥2000 times |
Charge While | Support |
Product Size | 275*190*130mm |
Product Single | 9.0KG |
Multi-Safety | Short-circuit protection |
Certification | GB;ROHS |
Accessories | 1 x User manual |
Output parameters | |||||
Item Outputs | USB Outputs | Type-C1 | Type-C2 | DC/Cigarette | |
USB1,2 | USB3,4 | TYPE-C1 | TYPE-C2 | DC/Cigarette | |
Output Voltage Range(V) | 5-12V | 5-12V | 5-20V | 5-12V | 12V |
Ripple & Noise(mV) Vp-p | <200mV | <200mV | <500mV | <500mV | <500mV |
Output Current | 2.0A | 2.0A | 2.2-3A | 2.2-3A | 7A |
Over Current point | >3.6A | >3.6A | >3.6A | >3.6A | >7.5A |
Rated Power | 24W Max | 24W Max | 60W Max | 30W Max | 84W Max |
Over-Load Protection | Self-recover | Locked,need re-start | |||
Short-Circuit Protection | Self-recover | Locked,need re-start | |||
Remark | 1.Ripple&Noise test method: Connect the unit and the loads by a 30cm long stranded wire.Load is connected with A 0.1uF ceramic disk |
Inverter parameters | |||||
Item Range | Min | Typical | Max | Unit | |
Output Voltage Range(V) | 198 | 220 | 242 | V | |
Output Frequency | 50HZ/60HZ | HZ | |||
Output Waveform | Pure Sine Wave | ||||
Rated Power | Resistive load | 300W | W | ||
Inductive load | 300W | ||||
capacitive load | 300W | ||||
Output VA | 220VA | VA | |||
Surge power (Resistive load) | W | ||||
Standby power | <5W | W | |||
Efficiency | >80% | % | |||
Overload Protection Mode | Turn off output, recover after overload removal | ||||
short circuit protection Mode | Tum off output, short circuit after removal | ||||
Over Temperature protection Mode | Tum off output, short circuit after removal | ||||
Over Temperature Protection Valve | ≥65(cell surface) | ℃ | |||
Heat-Dissipating Method | Built-in Cooling Fan | ||||
Fan to Run When Temperature Meets | ≥40(environment temperature of front | ℃ | |||
Remark | AC output and DC output can be used |
Battery pack | ||||||
Item Range | Min | Typical | Max | Unit | Remark | |
Battery Type | Ternary Lithium Battery | |||||
Battery Pack | single cell | |||||
Battery Capacity | 280Ah/314Ah | Wh | ||||
Charge Voltage | 2.5 | 3.6 | V | product | ||
Charge cut-off Voltage | V | battery | ||||
Charge Current | A | battery | ||||
Under/Over | By | 2.7V | V | Battery | ||
Efficiency | ≥87% | |||||
Time of Charging | PD charging | 16H | 18H | 20H | ||
DC charging | 6H | 7H | 8H |
LED display function | |
Charged state | Electricity level |
LED1 twinkling | 0-20% |
LED1 lighting、LED2 twinkling | 20-40% |
LED1、LED2 lighting、LED3 twinkling | 40-60% |
LED1、LED2、LED3、LED4 twinkling | 60-80% |
LED1、LED2、LED3、LED4、LED5 lighting | 80-100% |
Discharge condition | Electricity level |
LED1、LED2、LED3、LED4、LED5 lighting | 80-100% |
LED1、LED2、LED3、LED4 lighting | 80-60% |
LED1、LED2、LED3 lighting | 60-40% |
LED1、LED2 lighting | 40-20% |
LED1 lighting | 20-5% |
LED1 twinkling | < 5% |
Panel button function | |
Keystrokes | Functional description |
turning on/off LED | Click to turn on/toggle LEDs long press to turn off LEDs |
turning on/off DC/USB | Click to Click to turn |
turning on/off AC inverter output function | Press and hold to turn on/off the AC inverter output function. |
X
Appointment Experience